Aluminium hydraulic forming press Fritz Muller 5000 MT — 5000 ton

Dabrox Listing ID: 75903

Request detailed information on this offer:
- availability, price
- payment/delivery terms
- specifications, condition, photos, etc.

* Required fields

Fritz Muller 5000 MT hydraulic press - description

Aluminium hydraulic forming press Fritz Muller 5000 MT — 5000 ton (ID:75903) is industrial press equipment in which force is generated by the pressure of working fluid in a hydraulic cylinder. The hydraulic system allows smooth adjustment of speed, force, and ram stroke, making the press a versatile tool for a wide range of operations. The equipment is characterized by high energy capacity and the ability to develop maximum force at any point of the working stroke.

Technical specifications Fritz Muller 5000 MT (ID:75903)

TypeHydraulic press
ManufacturerFritz Muller
Model5000 MT
Nominal force5000 ton
Table size2500 x 1000mm
Height of the upper container for rubber700 mm
Slide stroke900 mm
Maximum distance from table to slide1400 mm
Dimensions2650 x 2650 mm
Press height above floor5600 mm
Overall height7600 mm
Total weight350 tons

Hydraulic press Fritz Muller - technological processes and operations

Press fitting Press fitting is an assembly operation in which one part is inserted into another under the force of a press. The connection is achieved through interference fit, where the mating surfaces are held together by friction. The process provides strong and precise joints without the use of heat or fasteners. Used in the assembly of bushings, bearings, pins, and other components requiring a tight fit.
Sheet stamping Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts.
Drawing Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced.
Deep drawing A sheet blank is drawn into the die to a depth significantly exceeding its transverse dimension. The process is carried out in stages, with intermediate transitions, to avoid tears and wrinkles. At each stage, the metal is gradually redistributed, increasing the depth of the part while maintaining wall thickness. This method produces hollow products of complex shape — cylinders, shells, and housings.
Bending Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness.