Hydraulic press Muller ZE 600 — 600 ton

Dabrox Listing ID: 75599

Request detailed information on this offer:
- availability, price
- payment/delivery terms
- specifications, condition, photos, etc.

* Required fields

Muller ZE 600 hydraulic press - description

Hydraulic press Muller ZE 600 — 600 ton (ID:75599) is industrial press equipment in which force is generated by the pressure of working fluid in a hydraulic cylinder. The hydraulic system allows smooth adjustment of speed, force, and ram stroke, making the press a versatile tool for a wide range of operations. The equipment is characterized by high energy capacity and the ability to develop maximum force at any point of the working stroke.

Technical specifications Muller ZE 600 (ID:75599)

TypeHydraulic press
ManufacturerMuller
ModelZE 600
Pressure600 ton
Distance between columns2600 mm
Stroke900 mm
Dayligth1600 mm
Table-size2000 x 1600 mm
Ram surface2000 x 1600 mm
Oil volume3900 L
Die cushion hydr. pressure/stroke250 ton / 400 mm
Main drive55 kW
Total power200 kW
Dimensions of the machine2,2 x 3,58 x 7,7 m
Total weight110 ton

Hydraulic press Muller - technological processes and operations

Press fitting Press fitting is an assembly operation in which one part is inserted into another under the force of a press. The connection is achieved through interference fit, where the mating surfaces are held together by friction. The process provides strong and precise joints without the use of heat or fasteners. Used in the assembly of bushings, bearings, pins, and other components requiring a tight fit.
Sheet stamping Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts.
Drawing Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced.
Deep drawing A sheet blank is drawn into the die to a depth significantly exceeding its transverse dimension. The process is carried out in stages, with intermediate transitions, to avoid tears and wrinkles. At each stage, the metal is gradually redistributed, increasing the depth of the part while maintaining wall thickness. This method produces hollow products of complex shape — cylinders, shells, and housings.
Bending Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness.