Stamping press Schuler T2-1500-8-500 — 1500 ton
Schuler T2-1500-8-500 stamping press - description
Technical specifications Schuler T2-1500-8-500 (ID:75786)
| Type | Stamping press |
|---|---|
| Manufacturer | Schuler |
| Model | T2-1500-8-500 |
| Effort | 1500 ton |
| Number of racks | 4 |
| Number of stamping positions | 8 |
| Workpiece cutting position with swivel knife | 1 |
| Clear distance between racks | |
| From right to left | 1560 mm |
| Front to back | 5480 mm |
| Distance between the dies’ axes | 500 mm |
| Sliding die plate | |
| Dimensions | 200 х 1200 х 4050 mm |
| Lifting capacity | 25000 kg |
| Distance between the die plate and the press slide in the upper crank position | 1050 mm |
| Press slide stroke | 400mm |
| Adjustment of the distance between the die plate and the slider at each position | 50 mm |
| Stroke of the upper hydraulic ejector | 10 mm |
| Sliding rack and pinion transport (clamshell) | |
| Distance between rails open / closed | 600-900 / 300-600 mm |
| Feed stroke | 500 mm |
| Distance from the die plate to the transport plane | 500 mm |
| Roll box | |
| Belt width min … max | 100 … 300 mm |
| Inner roll diameter | 508 / 610 mm |
| Spreading range | 460 … 520 / 560 … 620 mm |
| Roll outer diameter, max | 1300 mm |
| Roll weight max | 3000 kg |
| Lifting force of the loading table | 60000 N |
| Loading table lifting stroke | 300 mm |
| Spreader mandrel drive | geared motor |
| Correct unwinding device | |
| Belt width min … max | 100 … 300 mm |
| Belt thickness min … max | 2 … 3 mm |
| Material hardness max | 450 N / mm |
| Straightening roll diameter | 60 mm |
| Number of straightening rolls | 7 |
| Traction roll diameter | 120 mm |
| Number of traction rolls | 2 |
| Feed rate | 3 … 15 m / min |
| Strip laying mechanism | |
| Strip width | 100 … 200 mm |
| Strip thickness | 2.0 … 3.6 mm |
| Strip length max | 3000 mm |
| Stack height of strips max | 500 mm |
| Max strips stack weight | 3000 kg |
Stamping press Schuler - technological processes and operations
| Sheet stamping | Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts. |
|---|---|
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |
| Bending | Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness. |