Sheet stamping press Erfurt PKZZ IV 500.1 FS — 500 ton
Erfurt PKZZ IV 500.1 FS stamping press - description
Technical specifications Erfurt PKZZ IV 500.1 FS (ID:75393)
| Type | Stamping press |
| Manufacturer | Erfurt |
| Model | PKZZ IV 500.1 FS |
| Manufactured by | Erfurt (Germany) |
| Capacity | 500 ton |
| Table size | 2800 x 1800 mm |
| Ram size | 2800 x 1700 mm |
| Ram stroke | 500 mm |
| Ram adjustment | 500 mm |
| Strokes per minute | 20 |
| Shut-height | 1100 mm |
| Distance between columns | 2800 mm |
| Stroke of cushion plate | 200 mm |
| Counter pressure of cushion in bed | 100 ton |
| Motor capacity | 75 kW |
Stamping press Erfurt - technological processes and operations
| Stamping | Forming of the workpiece in a die, where the material takes the geometry of the tool (die) under pressure. Stamping ensures high accuracy and repeatability, making it indispensable in mass production. |
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |