Sheet stamping press TMP Voronezh K3044V — 2500 ton
TMP Voronezh K3044V stamping press - description
Technical specifications TMP Voronezh K3044V (ID:75855)
| Type | Stamping press |
|---|---|
| Manufacturer | TMP Voronezh |
| Model | K3044V |
| Maximum force | 2500 ton |
| Slider stroke length | 600 mm |
| Slider strokes per minute | 11 rpm |
| The closed height | 1500 mm |
| Distance adjustment between underpunching plate and slider | 400 mm |
| Slider overall dimensions | |
| — from left to right | 4750 mm |
| — from front to rear | 1800 mm |
| The size of a under-forginig plate | |
| — width | 4450 mm |
| — height | 2000 mm |
| Hydropneumatic pillow | |
| — number | 3 |
| — total maximum force | 100 ton |
| — stroke length | 270 mm |
| The greatest weight of details of the stamp suspended to a slider | 10000 kg |
| Main electric motor power | 220 kW |
| Press overall dimensions | |
| — length | 5670 mm |
| — width | 8970 mm |
| — height | 16000 mm |
Stamping press TMP Voronezh - technological processes and operations
| Sheet stamping | Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts. |
|---|---|
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |
| Bending | Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness. |