Stamping press Ryazan AA6230 — 100 ton
Ryazan AA6230 stamping press - description
Technical specifications Ryazan AA6230 (ID:75512)
| Type | Stamping press |
|---|---|
| Manufacturer | Ryazan |
| Model | AA6230 |
| Maximum force | 100 ton |
| Course of a cross-arm | 40 mm |
| Number of courses of a cross-arm (adjustable) | 80,98,106,129,160,200 |
| Size of a course of a cross-arm before her extreme bottom position at which the | |
| effort of the automatic device corresponds to nominal effort, (no more) | 3,6 mm |
| The greatest distance between a table and a cross-arm in its bottom position | 400 mm |
| Size of adjustment of distance between a table and a cross-arm | 75 mm |
| Distance between the directing plug of columns in light | 900 — 450 mm |
| The greatest size of a step of submission | 240 mm |
| Aperture in the top cross-arm | D 60АЗ mm |
| Thickness of a under-forginig plate | 100 mm |
| The sizes of an aperture in a table | 710-300 mm |
| The greatest width of a tape | 300 mm |
| The greatest thickness of a tape | 2,8 mm |
| Feeds Level of a tape above a mirror of a table | 170-240 mm |
| The greatest speed of submission of a material | 20 m/min |
| Distance between axes roller submissions | 1860 mm |
| Press overall dimensions | |
| length | 2540 mm |
| width | 3160 mm |
| height | 2145 mm |
| Press weight | 1900 kg |
Stamping press Ryazan - technological processes and operations
| Sheet stamping | Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts. |
|---|---|
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |
| Bending | Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness. |