Transfer press Aida FT2-40 — 400 ton
Aida FT2-40 stamping press - description
Technical specifications Aida FT2-40 (ID:75787)
| Type | Stamping press |
|---|---|
| Manufacturer | Aida |
| Model | FT2-40 |
| Capacity | 400 tons |
| Capacity at above dead center 13 mm | 400 tons |
| Capacity between columns | 400 tons |
| Max. permissible pressure of each stage | 150 tons |
| Max. capacity of blanking stage | 100 tons |
| Stroke per minute | 8-12 |
| Stroke length | 800 mm |
| Die height (adjustment up, stroke down) | 1400 mm |
| Blanking stroke | 120 mm |
| Die height of blanking stage | 580 mm |
| Adjustable length of blanking stage | 20 mm |
| Adjustable length of tool holder | 80 mm |
| Dimension of tool holder | 690 x 1150 mm |
| Pitch of each stage | 700 mm |
| Height of lower die from bolster to feed bar bottom surface | 800 mm |
| Thickness of bolster plate | 250 mm |
| Dimension of bolster plate | 4200 x 1400 mm |
| Max. drawing depth | 280 mm |
Stamping press Aida - technological processes and operations
| Sheet stamping | Sheet stamping is a class of operations for forming parts from sheet material using dies. The workpiece is deformed in the tool without significant change in thickness, acquiring the specified shape. This group includes blanking, punching, bending, drawing, and other processes performed on presses. Sheet stamping is the foundation of mass production of body panels, housings, and other thin metal parts. |
|---|---|
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |
| Bending | Bending gives a sheet blank an angle or curvature. The metal is bent in the die under the force of the press: the outer layers stretch, the inner layers compress, and the middle retains its original length. The operation allows producing parts with the specified geometry without changing the material thickness. |