Trimming press TMP Voronezh K2542 — 1600 ton
TMP Voronezh K2542 trimming press - description
Technical specifications TMP Voronezh K2542 (ID:75579)
| Type | Trimming press |
| Manufacturer | TMP Voronezh |
| Model | K2542 |
| Made in | Russia |
| Maximum force | 1600 ton |
| Slider stroke length | 400 mm |
| Unattainable-course | 12 mm |
| Number of courses of a slider per minute | 16 rpm |
| Number of single turn-on | 12 rpm |
| The closed height | 870 mm |
| Adjustment | 220 mm |
| Under-forginig plate | |
| From left to right | 1600 mm |
| From front to rear | 1600 mm |
| Thickness | 650 mm |
| Slider overall dimensions | 1600 x 1600 mm |
| Aperture in a table | 1000 x 1000 mm |
| Window dimensions in cheeks | 1650 x 1650 mm |
| Course of a rigid pusher in a slider | 100 mm |
| Force of a rigid pusher in a slider ton-force | 80 |
| Main electric motor power | 110 kW |
| Course of pneumatic pillow | 160 mm |
| Force of pushing out of a pneumatic pillow ton-force | 71 |
| Hydropneumatic pillow | |
| Working course | 250 mm |
| Force of pushing out ton-force | 25 |
| Force of a clip ton-force | 250 |
| Press overall dimensions | 4670 x 4670 x 8110 mm |
| Press weight | 140 ton |
Trimming press TMP Voronezh - technological processes and operations
| Trimming | When a hot forging leaves the die, flash comes out with it — excess metal squeezed into the gap between the tools. It is removed on a trimming press, where the part passes through a die and the cutting edge shears off everything excess along the contour. This is how the forging gets a clean edge and precise shape, ready for the next stage. |
| Punching | A hole in a solid workpiece is a task handled by bulk punching. The metal is not drilled out but pushed through: the punch penetrates the workpiece, displacing material sideways and forming a through or blind hole. The operation is performed on presses, keeping the metal structure around the hole intact. Used in the production of bushings, rings, and hollow shafts. |
| Stamping | — |
| Drawing | Drawing turns a flat blank into a hollow product. The sheet is clamped at the edges while the tool presses the central part, forcing the metal to flow into the die cavity and form walls. This is how cups, caps, housings, and other parts with one open side are produced. |
| Punching | Punching holes in sheet metal is performed in a die: a tool with sharp edges passes through the workpiece, separating material along a closed contour. The process is fast and precise, leaving no burrs when properly set up. Used for producing holes, slots, and cutouts in sheet metal parts. |
| Blanking | Blanking a part from a sheet along a closed contour is performed on a press using a blanking die. The tool passes through the material, separating the finished part from the sheet. The accuracy of the contour and the cleanliness of the edge determine the quality of the final product. |